Installing Batteries - Epson PhotoPC 500 User Manual

Epson digital camera user guide photopc 500

Hide thumbs Also See for PhotoPC 500:

Specifications (1 page)

User manual (144 pages)

Table of Contents

EPSON PhotoPC 500

Approximately 100 milliwatt at power-on

Consumption

Approximately 4 W during image

processing

Maximum 12 W during flash discharge

Approximately 300 pictures (high

Battery

resolution) can be taken before the

life

batteries run out. (Using new alkaline

batteries, 150 flashed and 150

non-flashed pictures, without the

EPSON PhotoPix LCD monitor attached).

Batteries

Replace all four PhotoPC

500 batteries with any of the

following:

lithium batteries are recommended.

Caution

To avoid the &anger qfjire

explosion, do not mix different types

ofbatteries. Do not allow the battery contacts to touch metal objects

such as coins

keys, which could short out the battery's circuits.

Note the following when handling batteries:

Do not get them wet or expose them to fire.

remove the batteries and store them at a low temperature

in a dry location.

manufacturer's instructions and in compliance with all

applicable laws. Contact your local government agency

for information about battery recycling and disposal.

with four fully-charged batteries. If your batteries run out

faster after you recharge them a number of times, make

sure you discharge them completely before recharging.

EPSON PhotoPC 500 - 2

Checking the Battery Icon

Before you take pictures, check the battery icon on the

control panel. The icon shows how much battery power you

have left, in the following stages:

Full battery power (or AC adapter in use)

Battery power is decreasing

Battery power is low

Battery power is almost out

Change batteries