Messages - Pentax Optio 430 Operating Manual

Messages

Messages such as the following may be displayed on the LCD monitor
during camera operation.
Compression error Compression of the image you captured is
in fail. Change the recorded pixels or quality
levels, and take a picture again.
No base image found You are trying to take a picture in Multiple
Exposure mode when there is no base
image or the saved images are all movie
pictures.
Memory card full The CF card memory is full and no more
images can be saved. Insert a new CF card
or delete unwanted images. (p.14, p.58)
Change the quality/size and try again.
(p.44, p.45)
No images in camera There are no images on the CF card.
Camera can not display this You are trying to play back an image in a
image format not supported by this camera. You
may be able to display it on another brand
of camera or PC.
This image is protected The image you are trying to delete is a pro-
tected image. (p.60)
No card in camera There is no CF card in the camera. (p.14)
Battery depleted The battery is exhausted. Charge the battery
or replace with a charged battery. (p.10, p.11)
Battery depleted, the image The battery is exhausted. The image you just
is not stored. captured has not been saved. Charge the bat-
tery or replace with a charged battery. (p.10,
p.11)
Memory card error Shooting and playback are impossible due
to a problem with the CF card. Try display-
ing on a PC.
82
This card is not formatted The card you have inserted is unformatted
or has been formatted on a PC or other
device. (p.72)
Image recording... The image is being recorded on the CF
card.
DPOF settings recording... The DPOF settings are being recorded on
the CF card.
Movie recording... The movie picture is being recorded on the
CF card.
(Un)Protecting... The image is being protected or unprotect-
ed.
Formatting... The CF card is being formatted.
Deleting image... The image is being deleted.
Alarm was set The alarm has been enabled.
Image folder can not be cre- The largest file number is assigned to an
ated. image and no more images can be saved.
Insert a new CF card or format the CF
card.
This image can not be used You have selected an invalid image for the
to the base image. base image in Multiple Exposure mode.
83