Using The Ac Adapter (Optional) - Pentax Optio 430 Operating Manual

G Approximate Operating Time (when fully charged)
Number of recordable images
LCD monitor ON
With the flash
fired for 50% Approx. 130
of the shots
Without the flash Approx. 160
* The above table is based on Pentax measuring conditions and may vary
depending on capture mode and shooting conditions.
Performance of the battery may deteriorate in low tempera-
Caution
tures.
G Battery Level Indicator
You can check the battery level by the
the LCD monitor.
(lit green) : Adequate power remains.
↓
(lit green) : Battery is running low.
↓
(lit yellow) : Battery is running very low.
↓
(lit red) : Battery is exhausted.
↓
[Battery depleted] : After the message is displayed, the camera
will turn off.
12
Playback time
LCD monitor OFF
Approx. 160
Approx. 75 min.
Approx. 200
symbol displayed on
Terminal cover

Using the AC Adapter (optional)

If you intend to use the LCD monitor for a long time or connect the
camera to a PC, use of the AC adapter D-AC2 (optional) is recom-
mended.
z
Connect the AC plug cord to the AC adapter.
x
Plug the AC plug cord into the power outlet.
c
Open the terminal cover of your camera and connect the
AC adapter to the DC input terminal.
When using the AC adapter, the battery level indicator is not dis-
memo
played on the LCD monitor.
• Make sure that the camera is turned off before connecting
Caution
the AC adapter.
• When using the AC adapter D-AC2, be sure to read the
operation manual accompanying the AC adapter.
AC adapter
AC plug cord
13