Table of Contents
Advertisement
Connecting the camera and your Macintosh
z
Turn on your Macintosh.
x
Turn off the camera and connect your Macintosh and
camera using an USB cable.
c
Turn on the camera.
The camera will be detected as [untitled] on
the desktop. The folder name can be changed
as desired.
Although images can be viewed and printed, image data is in the
memo
CF card of the camera. To save the image data in the CF card to
another medium, refer to the instruction manual of your Macintosh
and move or copy files.
You can edit images on your Macintosh after moving or copying
files there.
70
Viewing images on your Macintosh
z
Double click the [ACDSee
x
Double click the [ACDSee
Camera images can be found in the [untitled] ➝ [Dcim] ➝
[xxxpentx] (xxx is a 3-digit numeral) folder on the desktop.
You can also view movie pictures operating the above procedures.
memo
Disconnecting the camera from your Macintosh
z
Drag the [untitled] folder on the desktop to Trash.
x
Remove the USB cable from your Macintosh and camera.
TM
] folder on the hard drive.
TM
] program icon.
71
Advertisement
Table of Contents
