Setting The Brightness Level; Resetting To Default Settings (Reset); Sounding The Alarm At A Set Time; Checking The Alarm - Pentax Optio 430 Operating Manual

Setting the Brightness Level

You can set the brightness of the LCD monitor.
z
Select [Brightness Level] on the [Set-up] menu.
x
Use the four-way controller (
ness level, [1] to [7].
c
Press the OK button.
The camera is ready to take or play back images.

Resetting to Default Settings (Reset)

You can reset all the settings other than the date and time, lan-
guage, home time, alarm, video output format and date style.
z
Select [Reset] on the [Set-up] menu.
x
Press the four-way controller but-
ton ( ).
The Reset screen will be displayed.
c
Use the four-way controller (
to select [Reset].
v
Press the OK button.
The camera is ready to take or play back images.
78
) to select the bright-
Reset
Reset all camera settings
to defaults?
)
Reset
Cancel
Exit Ok
MENU OK

Sounding the Alarm at a Set Time

You can sound the alarm at a specified time and display a selected image.

Checking the Alarm

z
Press the Menu button in Play
mode.
The [Playback] menu will be dis-
played.
x
Press the four-way controller (
[Alarm].
c
Press the four-way controller (
The alarm list will be displayed.
The alarms that are enabled will be
indicated by a tick.
v
Press the OK button twice.
If any alarms are enabled, the cam-
era will be turned off and the alarms
will be set.
Mode dial
DPOF button
Menu button
Four-way controller
Playback Set-up
Slideshow 3sec
Alarm On
1/1
MENU Exit OK Ok
) twice and select
).
Alarm
1 Everyday 18:00
2 Once 00:00
3 Once 00:00
MENU Exit OK Ok
79