Registration Using Ip Address (Manual Registration); Editing The Manually-Registered Projector List; Deleting A Projector From The Projector List - Epson Artisan EMP-830/EMP-835 Operation Manual

Registering Projectors for Monitoring

Registration Using IP Address (Manual Registration)

PROCEDURE
1
Click the "Manual registration" button in the
"Register projector" window.
2
Enter the IP address for the projector to be registered
in the "IP address" box, and then click the "Confirm"
button.
If a projector with the specified IP address is found on the
network, the projector's name will be displayed, so check that it
is the target projector. If it is not the target projector, re-enter
the IP address.
3
Click the "Add" button.
TIP
If a password entry window is displayed, enter the password for the
projector's administrator and then click the "OK" button.

Editing the Manually-Registered Projector List

Use the following procedure to change the projector name or IP address for
projectors that have been registered manually.
PROCEDURE
1
Select the projector to be edited in the "Register
projector" window, and then click the "Edit" button.
2
If the projector name has changed, simply click the
"Confirm" button.
If the IP address has changed, enter the new IP
address and then click the "Confirm" button.
Check that the projector name is correct.
3
Click the "Update" button.

Deleting a Projector from the Projector List

Select the projector to be deleted from the list in the
"Register projector" window, and then click the "Delete"
button.
More than one projector can be selected at the same time.
EMP Monitor Operation Guide
5