Craftsman 315.115470 Operator's Manual page 14

ADJUSTABLE
TORQUE CLUTCH
This product is equipped with an adjustable torque
clutch for driving different types of screws into different
materials. The proper setting depends on the type of ma-
terial and the size of screw you are using.
ADJUSTING TORQUE
See Figure 8.
[] There are twenty-four torque indicator settings located
on the front of the drill.
[] Rotate the adjusting ring to the desired setting.
• 1-4
5-8
9-12
13 - 16
17 - 23
•
411
For driving small screws
For driving screws into soft material
For driving screws into soft and hard
materials
For driving screws into hard wood
For driving large screws
For heavy drilling
LED WORKLIGHT
See Figure 9.
The LED worklight on the foot of the drill will come on
when the switch trigger is depressed. This provides
additional lighting on the surface of the workpiece for
operation in lower-light areas.
TO DECREASE
TORQUE
TO iNCREASE
TORQUE
ADJUSTING RING
Fig. 9
BIT STORAGE
See Figure 10.
When not in use, bits provided with the drill can be placed
in the storage area located on the base of the drill.
SCREWDRIVER BIT(B)
Fig. 8
BIT STORAGE AREA
Fig. 10
14