Advertisement
ADJUSTABLE TORQUE CLUTCH
The drillis equipped with an adjustable torque clutch for
driving different types of screws into different materials.
The proper setting depends on the type of material and
the size of screw you are using.
ADJUSTING TORQUE
See Figure 6.
• There are twenty-four torque indicator settings located
on the front of the drill.
• Rotate the adjusting ring to the desired setting.
•
1 - 4
For driving small screws
•
5 - 8
For driving screws into soft
material
• 9 - 12
For driving screws into soft and hard
materials
• 13 - 16
For driving screws into hard wood
• 17 - 23
For driving large screws
• 41L!
For heavy drilling
TODECREASE
ADJUSTING
TORQUE
RING
LED WORKLIGHT
See Figure 7.
The LED worklight on the foot of the drill will come on
when the switch trigger is depressed. This provides addi-
tional lighting on the surface of the workpiece for opera-
tion in lower-light areas.
LED
WORKLIGHT
Fig. 7
TOINCREASE
TORQUE
BIT STORAGE
See Figure 8.
When not in use, bits providedwith the drill can be placed "
in the storage area locatedon the base of the drill,
SCREWDRIVER BIT(S)
Fig. 6
BIT
AREA
Fig. 8
13
Advertisement
