Advertisement
BATTERY
PACK
SHOWN IN CHARGER
\
CHARGING
ASSEMBLY
REDLED
ORANGE LED
CHARGING STAND
Fig. 2
TO INSTALL BATTERY PACK
See Figure 3.
• Lock the switch trigger on the drill by placing the direc-
tion of rotation selector in the center position.
•
Place the battery pack in the drill. Align the raisedrib
on the battery pack with the groove insidethe drill.
CAUTION: When placing battery pack in the tool,
be sure raised rib on battery pack aligns with the
bottom of the drill and latches into place properly.
Improper installation of the battery pack can cause
damage to internal components.
• Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured in the
drill before beginning operation.
TO REMOVE BATTERY PACK
See Figure3.
•
Lockthe switch triggeron the drillby placing the direc-
tion of rotation selector in the center position.
•
Locatethe latches on the side of the battery pack and
depress to release the battery pack from the drill.
•
Removethe battery pack from the drill.
LATCHES
RELEASE B ATTERY P ACK
Fig. 3
11
Advertisement
