Print A Network Status Sheet - Epson WorkForce 600 Series Network Installation Manual

■
The printer's IP Address may have changed. If the printer is set to obtain an IP
address automatically, the IP address may change each time the printer is
turned on. If the IP address has changed, you will need to repeat the steps in
"Configure Epson Scan Network Settings" on page 29. To keep the IP address
from changing, try the following: always power on your network devices in
the same order, always keep the printer on, or set your DHCP server to reserve
an IP address for the printer (see your router's documentation for details).

Print a Network Status Sheet

1. If necessary, press the
the Home menu, then select
2. Select
Network Settings
36
Troubleshooting
Home
WorkForce 600 Series
and Artisan 700 Series:
Press l or r to select
Setup, then press OK.
.
WorkForce 600 Series
and Artisan 700 Series:
Press l or r to select
Network Settings, then
press OK.
button on the printer control panel to return to
.
Setup
Artisan 800 Series:
Press Setup.
Artisan 800 Series:
Press r, then press
Network Settings.