Print A Network Status Sheet; Printing And Copying Problems; Paper Feeding Problems - Epson WorkForce WF-2530 Quick Manual

Epson workforce wf-2530 all-in-one printer
Hide thumbs Also See for WorkForce WF-2530:
Table of Contents

Advertisement

If you cannot scan from the product's control panel, make sure you restarted your
computer after installing the product software. Make sure EPSON Event Manager is
not being blocked by your firewall or security software.
If you are scanning a large document at high resolution, a communication error may
occur. If the scan did not complete, lower the resolution.
Check the
If network communication was interrupted while starting EPSON Scan, exit EPSON
Scan, and restart it after a few seconds. If EPSON Scan cannot restart, turn the
product off and on, and then try again. Check the
Settings.

Print a Network Status Sheet

1.
Press x
Menu
2.
Press u or d to select
3.
Press u or d to select
to print a network status sheet.

Printing and Copying Problems

Make sure the size of paper you loaded matches the paper size selected on the control
panel or in your printer software.
Make sure your original is placed properly (see page 6). If your original is on the
scanner glass and the edges of your copy are cropped, move your original away from
the edges slightly. Also, place the document flat against the scanner glass.
Printing stops when an ink cartridge is expended. If a color cartridge is expended, you
may be able to continue printing temporarily with black ink; see the online
User's Guide for more information. If the black cartridge is expended, you must
replace it to continue printing.
Make sure your paper is loaded short edge first and is positioned against the right side
with the edge guide against its left side. Don't load paper above the arrow mark on the
edge guide.

Paper Feeding Problems

If paper doesn't feed, remove it from the sheet feeder. Flip through the stack to
separate the sheets a little. Then reload the paper against the right side, and slide the
left edge guide against the paper (but not too tightly).
Don't load too many sheets at once. See your online User's Guide for information on
paper loading limits. Don't load paper above the arrow mark on the edge guide.
28
Printing and Copying Problems
setting and test the connection using EPSON Scan Settings.
Connection
.
Wi-Fi Settings
Print Wi-Fi Status Sheet
Timeout Setting
, then press
.
OK
, then press the
in EPSON Scan
button
Color
x
Start

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents