Epson WorkForce 600 Series Network Installation Manual page 10

9. Select your network name (SSID) from the list, then click
Note:
If your router or access point doesn't broadcast its network name (SSID), select
Manually Enter Network Name (SSID) and enter the network name. Click Next.
On the next screen, select your wireless network security type, then click Next.
10. If your wireless network doesn't have security enabled, continue with step 11.
If your wireless network has security enabled, do one of the following:
■
If you see the
key is either 5 or 13 characters, or select
is either 10 or 26 characters. Enter your WEP key in the two text fields,
leave the active WEP key set to
10
Wireless Network Installation
WEP Security Settings
screen, select
Hexadecimal
(usual default), and click
1
.
Next
if your WEP
ASCII
if your WEP key
.
Next