Ejecting Memory Cards; Changing Print Setting - Epson Stylus Photo RX500 Basic Operation Manual

5. If the images are stored on the memory card, the following
message appears. Press the D or OK button.
A
C

Ejecting memory cards

1. Make sure all the printing job is finished and the memory card
light is not flashing.
2. Open the memory card slot cover.
3. Eject the memory card by pulling it out straight from the slot.
Caution:
c
❏ Do not remove the memory card or turn off the product while
❏ If you are using this product with a computer which has

Changing Print Setting

You can change the print setting when the LCD panel is in the state
shown below.
the printing or while the memory card light is flashing. Data on
the memory card may be lost.
Windows 2000 or XP installed, never turn this product off or
disconnect the USB cable with a memory card inserted in this
product; this may destroy data on the memory card. See the
Reference Guide for detail.
A
C
Printing Directly from a Memory Card
B
D
B
D
47