Ejecting Memory Cards - Epson Stylus Photo RX600 Basic Operation Gude

Note:
You can load only one memory card at a time.
3. Close the memory card slot cover.
Caution:
c
❏
❏
❏
❏
Note:
If the memory card is inserted incorrectly, the memory card light does not go on.

Ejecting memory cards

1. Make sure all the printing job is finished and the memory card light
is not flashing.
2. Open the memory card slot cover.
3. Eject the memory card by pulling it out straight from the slot.
28
Printing Directly from a Memory Card
Do not try to squeeze the memory card into the slot. Memory cards
cannot be fully inserted into the card slots.
Incorrect loading of a memory card may damage this product,
memory card, or both.
Keep the memory card slot cover closed while the memory card is
loaded, which protects the memory card and the slot from dust and
static; otherwise data on the memory card may be lost, or this
product may be damaged.
Depending on the memory card loaded in this product, the static
charge on the memory card may cause this product to malfunction.