Choosing The Receive Mode - Furuno NX-700A/B Operator's Manual

2.6

Choosing the Receive Mode

The NAVTEX menu allows you to select what station to receive, automatically,
manually. The Auto mode requires navigation data, and stations are
automatically selected according to the distance between own ship and NAVTEX
stations. If navigation data is not input, all stations are selected. The manual
mode lets you freely stations to receive. The INS mode allows you to set the
station, message and local channel from the external equipment (ex. Integrated
Navigation System, using NRM or PFEC sentence) connected. Note that Manual
should be chosen if you intend to not use the command from the external
equipment.
1. Press the MENU/ESC key to show the main menu.
2. Press ▲ or ▼ to choose NAVTEX.
3. Press the ENT key or ► to open the NAVTEX menu.
4. Press ▲ or ▼ to choose Mask Mode, and then press the ENT key or ► to
show the mask mode options.
5. Press ▲ or ▼ to choose INS (for INS mode) or Manual (for Auto or Manual
mode) as appropriate, and then press the ENT key.
When choosing INS, Auto Rcv Mask and Local Channel are disappeared
from the NAVTEX menu.
6. For Auto and Manual modes, do the follows.
a) Choose Auto Rcv Mask, and then press the ENT key.
b) Press ▼ to choose "On" for Auto or "Off" for Manual, and then press ENT
key.
7. Press the MENU/ESC key several times to close the menu.
Menu
NAVTEX
System
Display
Service
Main menu
NAVTEX
Mask Mode Manual
Auto Rcv Mask On
Local Channel 490kHz
Rcv Mask
INS Output Mask
Printer Mask
NAVTEX menu
INS
Manual
Mask mode options
2. OPERATION
2-5