Specifications - Furuno NX-700A/B Operator's Manual

FURUNO
SPECIFICATIONS OF NAVTEX RECEIVER
1 NAVTEX RECEIVER
1.1 Receiving frequency
1.2
Mode of reception
1.3
Sensitivity
1.4
Input protection
1.5 Spurious emission
1.6
Message category
2 DISPLAY UNIT
2.1
Display system
2.2
Display modes
2.3
Message storage
3 PRINTER SECTION (FOR NX-700A ONLY)
3.1 Printing system
3.2 Printing paper
3.3 Printing width
3.4 Character format
3.5 Dot pitch
3.6 Number of characters
3.7 Print speed
NX-700A/B
518 kHz and 490 kHz (or 4209.5 kHz), receive both frequencies
simultaneously
F1B
2 μV e.m.f. (50 ohms), 4% error rate or less
Withstands 30 Vrms for 15 minutes or more (w/ pre-amp unit)
1nW or less
A: navigational warning
B: meteorological warning
C: ice report
D: earch and rescue information/piracy and armed robbery
E: meteorological forecast
F: pilot message
G: AIS
H: LORAN-C message
I: reserved presently not used
J: SATNAV message
K: ohter electronic navigational aid system message
L: navigational warning (additional)
M to Y: reserved presently not used
Z: QRU (no message on hand)
5-inch, 76 (W) x 100 (H) mm, monochrome LCD, 240 x 320 dots
Message selection mode
Message display mode
200 messages x 2 channels
(100,000 characters x 2 channels)
Line thermal head printing system
Thermal paper (58 mm x 30 m)
48 mm
24 x 12 dot
8 dots/ mm
32 characters/line
Approx. 20 mm/sec.
SP - 1
NX-700A/B
E5649S01F-M