Recommended Accessories - COMPANION 137.232040 Operator's Manual

RECOMMENDED ACCESSORIES
Visit your Sears Hardware Department or see the
Craftsman Power and Hand Tools Catalog to purchase
recommended accessories for this power tool.
To avoid the risk of personal injury:
• Do not use adjustable (wobble) type dadoes or
carbide tipped dado blades.
• Maximum dado width is 1/2".
• Do not use a dado with a diameter larger than 6".
• Do not use molding head set with this saw.
• Do not modify this power tool or use accessories not
recommended by Sears.
TOOLS NEEDED
Medi_m screwddve_
#2 Phillips screwdrver
Adiustabte w_'ench
Straight edge
Combinatien squa{e
UNPACKING AND CHECKING CONTENTS
• For missing or damaged parts on initial
purchase, call 800-843-1682
• To order parts, call 800-366-7278
Separate all parts from packing materials. Check each
part with the illustration on the next page and the "Table
of Loose Parts" to make certain all items are accounted
for, before discarding any packing material.
If any part is missing or damaged, do not attempt to
assemble the table saw, plug in the power cord, or turn
the switch ON until the missing or damaged part is
obtained and is installed correctly.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QUANTITY
A. Table saw assembly 1
B. Blade 1
C. Blade wrenches 2
D. Miter gauge 1
E. Hex keys 2
F. Bolt, flat washer, toothed washer, 1
Oval washer, spring washer
G. Blade guard and splitter 1
H. Dado table insert 1
I. Rip fence, lock handle & nut 1
J. Flat washer & Dome nut 1
K. Handwheel 1
each
TABLE EXTENSION CONTENTS
L. Table extension 1
M. Table ext. mounting hardware bag 1
N. Table extension rip scale 1
STAND:
O.
P.
Q.
R.
S.
T.
U.
Short upper support 2
Long upper support 2
Short bottom support bracket 2
Long bottom support bracket 2
Leg 4
Foot Pad 4
Stand mounting hardware bag 1
NOTE: To make assembly easier, keep contents of box
together. Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean dry cloth. This will
reduce friction when pushing the workpeice. To avoid
injury, the styrofoam block should be removed between
the motor and the table.