Fujitsu SOFTUNE User Manual page 204

CHAPTER2 Dependence Functions
frame no.
Displays frame numbers in decimal notation.
b-addr
Displays a branch address or low-level reset occurrence address in hexadecimal notation, or displays the
standby state.
• For branch address
Branch destination address = 110C6: "-> 000110C6"
Branch source address = 110A8:
• For low-level reset occurrence address
Occurrence address = 11002: "00011002"
• For standby state
CPU sleep:
bus sleep:
timer:
stop:
b-cause
Displays a branch factor or low-level reset occurrence information.
Branch:
Trap:
INT:
RETI:
CALL:
RET:
Break:
Go:
LReset:
a-addr
Displays a data-accessed address in hexadecimal notation.
a-stat
Displays access status (read/write).
a-size
Displays the access size.
byte:
half:
word:
a-type
Displays the access type.
cpu:
dma:
lost:
194
"000110A8 ->"
CPU sleep state
Bus sleep state
Timer state
Stop state
Execution of branch instruction
Exception/trap
Interrupt
Execution of RETI instruction
Execution of CALL/CALL:D instruction
Execution of RET/RET:D instruction
Break
Start of execution of user program
Issuance of low-level reset
Byte
Half-word
Word
Indicates that CPU access has occurred.
Indicates that DMA access has occurred.
Indicates that CPU access and DMA access have occurred simultaneously.
In such cases, only the CPU-accessed data is traced.