Fujitsu SOFTUNE User Manual page 184

CHAPTER2 Dependence Functions
Notes:
• Do not set the code break (software) to an instruction placed in a delay slot. When set, an
incorrect instruction exception occurs. For details of the invalid instruction exception, refer to the
Hardware Manual for the product type you are using.
• When setting a code break (software) in a flash memory area, the contents of the flash memory at
the specified address is temporarily rewritten. For details, refer to "2.4.5 To Access the Flash
Memory".
• When the debugger has aborted in the state where the code break (software) is set, the contents
of the flash memory can be abnormal. For details, refer to "2.4.2 Ending debugging".
174