Pin Assignment Of Internal Ports - Fujitsu Siemens Computers D1931 Technical Manual

Pin assignment of internal ports

Pin assignment of internal ports
The pin assignment of some internal connections is shown in English in the following.
i
Some of the following connectors may be optional!
Front panel
Watch the poling of the LEDs. The positive pole
of the connection cables is often indicated with a
coloured wire.
Connection
Reset
Power On/Off
HD LED
Message LED
Power On LED Indicates the system state APM or ACPI together with the Sleep LED (see
chapter entitled "APM and ACPI system status, energy-saving modes").
Recovery see "Jumper settings" chapter
Password see "Jumper settings" chapter
Speaker 0,5 W at 8 Ohm
12 - English
Power On/Off
Reset
1) Both connector positions possible
2) 2pin or 3pin connector possible
Note
Connector for reset switch
Connection for ATX On/Off switch
Indicates HDD (hard disk) activity
Indicates system management error
1)
Message LED
Power On
LED 2)
HD-LED
Recovery Password
Speaker
A26361-D1931-Z120-1-7419, Edition 1
1
2