Fujitsu Siemens Computers D1931 Technical Manual page 33

Installing a memory module
2
► Push the holders on each side of the memory slot outwards.
► Insert the memory module into the location (1).
► At the same time flip the lateral holders upwards until the memory module snaps in place (2).
Removing a memory module
1
► Push the clips on the right and left of the memory slot outward (1).
► Pull the memory module out of the memory slot (2).
A26361-D1931-Z120-1-7419, Edition 1
Upgrading main memory
2
1
English - 23