Cancel (Event); Sequenceerror (Event) - Fujitsu ServerView Operations Manager V6.12 User Manual

Error.2=0
ErrorText.2=ERROR[0] faultless
execution

7.1.7.3 Cancel (Event)

Event.0=Cancel
Error.0=0
ErrorText.0=ERROR[0] faultless
execution

7.1.7.4 SequenceError (Event)

This event has no sub-events. This event indicates that a command cannot
be executed because Update Manager has an incorrect status.
Examples
An update status should not exist when StartFlash is called.
l
Cleanup is only possible if the status is READY.
l
Cancel (without parameter -S) is only possible if the status is PRE-
l
PARED.
Event.0=SequenceError
ServerView Update Management
7.1 GFCLI (Command-Line Interface)
Event: Cancel
Error number in the event
of an error
Description of the return
value
A command was called during the wrong
phase (unauthorized update status).
243