Cancel (Command) - Fujitsu ServerView Operations Manager V6.12 User Manual

7 Command-Line Interface
Return values
0
Update Ok (job status is READY)
All update jobs have been executed without errors.
1
No current job exists (connection established)
2
Timeout (no connection to the managed server)
3
SequenceError - command is not permitted during this phase (a job
has PREPARED status)
4
Update with errors (job status is READY)
At least one job could not be executed without errors.
5
GFI error
6
The required parameters for access control do not exist.
7
Access denied
10 Parameter error
11 Memory bottleneck
12 Multiple starting of CLI denied
13 The results file (option -F or logfile.txt) could not be opened.
14 The GFLog.txt log file could not be opened.
16 Rebuild of the inventory in progress. Try again later
17 Check command successfull, reboot needed by at least one com-
ponent
18 Managed server type not supported (virtual server / old offline server)

7.1.6 Cancel (Command)

Syntax
GFCLI -A -N <system> [-F <results file>]
[-L <user> [-P <password>]] [-M -T <IP-addr>] [-S]
[-B –Z <IP-addr> -T <IP-addr>]
[-E -T <IPaddr> -Y <inventory>]
236 ServerView Update Management