Apm - Asus SABERTOOTH 990FX GEN3 R2.0 User Manual

SB HD Azalia Configuration
The sub-items in this menu allow you to set the SB HD Azalia configuration.
HD Audio Azalia Device [Enabled]
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the controller.
The following two items appear only when you set the HD Azalia Audio Device item to
[Enabled].
Azalia Front Panel [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC'97 or high-definition audio depending on the audio standard that the
front panel audio module supports.
[AC97]
[HD]
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
3.5.8

APM

UEFI BIOS Utility - Advanced Mode
Main Ai Tweaker
Back Advanced\ APM >
ErP Ready
Restore AC Power Loss
Power On By PME Device
Power On By Ring
Power On By RTC
ErP Ready [Disabled]
This item allows user to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
ASUS SABERTOOTH 990FX/GEN3 R2.0
Sets the front panel audio connector (AAFP) mode to legacy
AC'97
Sets the front panel audio connector (AAFP) mode to high
definition audio.
Sets to [SPDIF] for SPDIF audio output.
Sets to [HDMI] for HDMI audio output.
Advanced Monitor
Disabled
Power Off
Disabled
Disabled
Disabled
Exit
Boot Tool
Allow BIOS to switch off some power
at S5 to get the system ready for ErP
requirement. When set to Enabled, all
other PME options will be switched
off.
3-25