Ai Tweaker Menu - Asus SABERTOOTH 990FX GEN3 R2.0 User Manual

To change a user password:
Select the User Password item and press <Enter>.
1.
From the Enter Current Password box, key in the current password, then press
2.
<Enter>.
From the Create New Password box, key in a new password, then press <Enter>.
3.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
3.4

Ai Tweaker menu

The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Scroll down to display other BIOS items.
UEFI BIOS Utility - Advanced Mode
Main
Current CPU Speed
Target CPU Speed
Current Memory Frequency
Current NB Frequency
Current HT Link Speed
Ai Overclock Tuner
CPU Ratio
AMD Turbo CORE technology
Memory Frequency
CPU/NB Frequency
HT Link Speed
CPU Spread Spectrum
PCIe Spread Spectrum
EPU Power Saving Mode
3-8
Ai Tweaker
Advanced
: 3400MHz
: 3200MHz
: 1333MHz
: 2000MHz
: 2000MHz
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Monitor Boot
[D.O.C.P.] When DOCP is enabled CPU
Bus frequency, CPU ratio and memory
parameters will be auto optimized.
Auto
Auto
Auto
Auto
Auto
Auto
→←: Select Screen
↑↓: Select Item
Auto
Enter: Select
+/-: Change Opt.
Auto
F1: General Help
F2: Previous Values
Disabled
F3: Shortcut
F5: Optimized Defaults
F10: Save
F12: Print Screen
Exit
Tool
ESC: Exit
Chapter 3: BIOS setup