Digi+ Power Control - Asus SABERTOOTH 990FX GEN3 R2.0 User Manual

4.3.5

DIGI+ Power Control

ASUS DIGI+ Power Control allows you to adjust VRM voltage and frequency modulation to
enhance reliability and stability. It also provides the highest power efficiency, generating less
heat to prolong the component lifespan and minimize power loss.
To launch DIGI+ Power Control, click Tool > DIGI+ Power Control on the AI Suite II main
menu bar.
Select CPU Power or DRAM Power to adjust the power control settings.
CPU Power
1
2
3
4
CPU Load-line Calibration
1
It allows you to adjust the voltage settings and control the system temperature.
Higher load-line calibration could get higher voltage and good overclocking
performance but increases the CPU and VRM thermal conditions.
CPU Current Capability
2
CPU Current Capability provides wider total power range for overclocking. A
higher value setting gets higher VRM power consumption delivery.
CPU Voltage Frequency
3
Switching frequency affects the VRM transient response and thermal components.
Higher frequency gets quicker transient response.
CPU Power Phase Control
4
Increase phase number under heavy system loading to get more transient and
better thermal performance. Reduce phase number under light system loading to
increase VRM efficiency.
CPU/NB Load-line Calibration
5
Set to a higher value for system performance, or to a lower value for better
thermal solution.
4-22
6
5
Click to proceed to next page
Application help
Applies all the
changes
Undoes all the
changes
Chapter 4: Software support