Installing A Memory Card - Lexmark Multifunction Laser User Manual

Installing a memory card

Note: Printer memory cards designed for other Lexmark printers may not work with the printer.
1
Remove the system board access cover. (See Accessing the printer system board.)
Warning: Printer memory cards are easily damaged by static electricity. Touch something metal such as the
printer frame before you touch a memory card.
2
Push open the latches on both ends of the memory card connector.
3
Unpack the memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
4
Align the notches on the bottom of the card with the notches on the connector.
5
Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6
Make sure each latch fits over the notch on the end of the card.
Installing and removing options
Memory card
connector
Installing a memory card
74