How To Mount The Cover - Craftsman 502.249274 Owner's Manual

ASSEMBLY
HOW TO MOUNT THE COVER
1,
Assemble the hinge to the cover (Figure 5). The fasteners are
shown full size below. Push the hinge toward the top of the
cover. Make sure the screws are at the bottom of the holes in
the hinge. Tighten the fasteners.
¢= Q
(A) (B)
4x24 15x66
2. Attach the handle to the cover with the fasteners as shown.
Tighten the fasteners.
3. Attach the window to the cover with the fasteners (Figure 6).
Make sure the flange and the two tabs are locked inside the
cover.
Cover
Handle
C
A
Figure 5
4,
©
(C) (D)
4x21 15x81
Set the cover in the operating position on top of the outer tube.
Fasten the hinge to the channel with the fasteners shown
below.
(Not Shown Full Size)
(E)
54407Z
Cover_,
E
Tab
C
Window
Flange
Figure 6
F-95900 8