Fujitsu F2 MC-8FX Family Operation Manual page 7

Lqfp-52p (0.65 mm pitch) header board for the f2 mc-8fx family

Hide thumbs Also See for F2 MC-8FX Family:

■ MCU footprint design notes

Figure 3 shows the recommended footprint dimensions of the NQPACK mounted on the printed cir-

cuit board for the user system. Take the footprint in Figure 3 into consideration as well as the foot-

print of the mass production MCU when designing the printed circuit board for the user system.

To follow the most updated information, be sure to contact Tokyo Eletech Corporation whenever de-

signing the printed circuit board.

No.1 Pin

Figure 3 Recommended Footprint Dimensions for Mounting the NQPACK

0.65 mm

0.4 mm

Table of Contents

Mb2146-261