Gpib Configuration; Configuring The Ni-488.2 Software Characteristics; Changing The Software Settings - National Instruments GPIB GPIB-ENET/100 Getting Started Manual

GPIB Configuration

Configuring the NI-488.2 Software Characteristics

Changing the Software Settings

© National Instruments Corporation
This chapter describes how to configure your Mac OS computer to use the
GPIB-ENET/100.
The default settings for NI-488.2 work for most applications and devices.
However, you might want to change a device name or primary address.
Also, if more than one GPIB interface or external box is installed, you
might want to associate a device with a particular interface.
Use the GPIB Configuration utility, NI-488 Config, to examine and change
the NI-488.2 settings for your GPIB-ENET/100.
1. To activate the configuration utility, select Control Panels from the
Apple Icon menu and select NI-488 Config.
2. Click the Interface Type menu and select Ethernet box products as
shown in Figure 4-1.
4-1
4
GPIB-ENET/100 for Mac OS