Removing The Hard Disk Cover - Fujitsu PRIMERGY TX150 S3 Options Manual

Preparation
4.1.3

Removing the hard disk cover

Remove the hard disk cover when making the following extensions and
upgrades:
– Installing further SATA hard disk drives
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the sever, press the on/off
switch.
Figure 5: Removing the hard disk cover
Ê Unlock the server (1) and remove the key.
Ê Push the drive cover up as far as possible (2).
Ê Remove the hard disk cover (3 + 4).
U41604-Z156-1-76
2
1
4
3
Options Guide
Floorstand model
15