Fujitsu PRIMERGY TX150 S3 Options Manual page 44

RemoteView Service Board S2 LP
Ê Open the server as described in the chapter "Preparation" on page 13 et
seqq. .
Figure 25: Connecting cables to the RSB S2 LP
Ê Connect the power cable (1) and the data cable (2) to the RSB S2 LP.
Ê Install the RSB S2 LP in PCI slot 1 as described in section "Installing a
controller" on page 32.
PCI Slot 1
1 2
Figure 26: Connecting cables to the system board
Ê Connect the data cable to the connector IPMB (1) and the power cable to the
connector RSB LP Power (2) on the system board.
36
BATTERY
Options Guide
RemoteView components
1
2
U41604-Z156-1-76