Extending/Replacing The Main Memory - Fujitsu PRIMERGY TX150 S3 Options Manual

Extending/replacing the main memory

The table below shows the order in which the memory banks must be equipped:
single channel
dual channel
5.2 Extending/replacing the main memory
Ê Open the server as described in the chapter "Preparation" on page 13 et
seqq. .
1
Figure 13: Removing a memory module
Ê Press the holders on either side of the mounting location concerned outward
(1).
Ê If the mounting location was already equipped: pull the memory module out
of the mounting location (2).
22
DIMM_1A DIMM_2A
equipped empty
empty equipped
empty empty
empty empty
equipped empty
empty equipped
equipped equipped
Options Guide
DIMM_1B
empty
empty
equipped
empty
equipped
empty
equipped
2
Main memory
DIMM_2B
empty
empty
empty
equipped
empty
equipped
equipped
1
U41604-Z156-1-76