Basic Setup - Freecom NETWORK MEDIAPLAYER 350 WLAN User Manual

6. Basic Setup

6..1 Video Setup
This is a guide for setting video output of Freecom MediaPlayer. You have to setup Free-
com MediaPlayer's video output mode same as TV set's video input mode.
When you can not see normal screen after connecting video cable, check
the followings:
1. "TV "– Switch to Video Input Mode: Turn on TV, and switch to video
input mode same as video connection. See TV user manual.
. "Freecom MediaPlayer" – Switch to Video Output Mode: Press "TV
OUT" button repeatedly. Whenever "TV OUT" is pressed, the video
output signal changes.
. When a normal screen appears, save the video configurations of the
Freecom MediaPlayer.
Connect to External AV Device
EN
6
65