Freecom Network Mediaplayer For Mac; Usb 2.0 Mode; Ndas Mode - Freecom NETWORK MEDIAPLAYER 350 WLAN User Manual

Freecom MediaPlayer
Chapter 5: Freecom MediaPlayer for Mac
EN
5.1 USB .0 Mode
5
In USB 2.0 Mode Freecom MediaPlayer is directly attached to a computer's USB Port.

5. NDAS Mode

In NDAS Mode Freecom MediaPlayer is directly attached to a 100 Mbit/s Full Duplex Fast
Ethernet Switch or Wireless Access Point. Each user on the network can use Freecom
MediaPlayer as if it was a local disk drive.
Freecom MediaPlayer via Router/Switch
1. Connect your Local Area Network (LAN) cable to Freecom MediaPlayer Ethernet Port.
This connection provides network access from your LAN or router to the Freecom
MediaPlayer.
2. Connect the included Ethernet cable to your PC.
Wireless users: Connect Freecom MediaPlayerto your wireless router or
access point with included Ethernet cable.
3. Make sure the power connector is firmly attached to the Freecom MediaPlayer and
connect the power adapter to a power source.
4. Press Power button on the frontside.
50
Freecom MediaPlayer via USB
Freecom MediaPlayer via WLAN