Freecom NETWORK MEDIAPLAYER 350 WLAN User Manual page 33

10. Set the network configurations of the Freecom MediaPlayer.
You have to connect the Freecom MediaPlayer to a TV set for this setup.
See "6.1 Connect Video Cable".
Press "SETUP" on remote control for moving to setup screen. Go to "Network". On
that screen, select 'DHCP Support Off' and write IP address & Subnet mask.
For example:
IP address:
Subnet mask:
After writing, press "SETUP" again for saving configurations.
If you have already been provided dynamic IP address from DHCP Server
or IP Router on your local area network, you don't need to write static IP
address absolutely. Use 'DHCP on' or write IP address & Subnet mask that
DHCP Server or IP Router provide.
Check 'IP address obtained automatically'.
When you use 'DHCP On', you can see the IP address on information screen
with pressing "INFO" button.
192.168.1.2
255.255.255.0
Shared File Playback (Stream)
EN