Set Network Configurations; Wireless Lan Connection - Freecom NETWORK MEDIAPLAYER 350 WLAN User Manual

Freecom MediaPlayer

. Set Network Configurations

EN
After connecting the LAN cable, you have to set network configurations of Computer
and Freecom MediaPlayer. You need to share a folder on Windows computer and use

same 'IP address range' and same 'Subnet Mask ' between Windows computer and
Freecom MediaPlayer.
For example:
IP address
Subnet Mask
It is possible to assign IP address and Subnet Mask of the Freecom Me-
diaPlayer as Dynamic or Static.

. Wireless LAN Connection

Freecom MediaPlayer supports two types of wireless structure modes: Infrastructure
mode & Ad-Hoc mode.
Ad-Hoc Mode
1:1 wireless LAN connection type between wireless adapter and Freecom MediaPlayer
without wireless access point.
Infrastructure Mode (AP)
Wireless LAN connection type with Wireless Access Point.
Wireless AP (Infrastructure Mode) or Wireless Adapter (Ad-Hoc Mode)
is needed for wireless connection. IEEE 0.11g wireless standard is
recommended for better wireless environment. Freecom MediaPlayer
is compatible with IEEE 0.11g & b standard.
4
Computer
192.168.1.2
255.255.255.0
Ad-Hoc Mode
Network Freecom MediaPlayer
192.168.1.3
255.255.255.0
Infrastructure Mode (AP)