Setting The Low Fuel Alarm; Alarm Activation; Resetting The Trip Log Or The Total Log - Navman FUEL 2100 Installation And Operation Manual

Setting the low fuel alarm

Use the key to select the alarm function. The LCD
will indicate for two seconds and will then display
the present alarm value. If no alarm value has been
entered the LCD will indicate
^
FLOW
Press and hold both keys for three seconds and the
displayed value will begin to flash.
Press and hold for 3 seconds
Use the and keys to select the desired alarm
value. Press and hold both keys for one second to
save this new value to memory and to exit this function.
The display will indicate
The arrow pointing at the alarm bell will be activated.
NAVMAN
FUEL 2100 Installation and Operation Manual
.
V
TOTAL
and then the new value.
#

Alarm activation

If the fuel remaining value drops below the fuel alarm
value, the alarm will sound and the alarm arrow will
flash.

Press any key to mute the alarm. The alarm arrow
will continue to flash as long as the alarm condition
remains.
Resetting the TRIP LOG or
the TOTAL LOG
To reset a log, press the
indicates the name of the log to be reset.
Press and hold both keys for three seconds. Display
will show or
to zero.
Press and hold for 3 seconds
The trip log value may be reset without changing
the total log value.
If the total log is reset to zero, then the trip log
will automatically reset to zero.
If the total log exceeds 999 then both it
and the trip log will be reset to zero.
#
key until the display
for 2 seconds before resetting
Note :
5