Desk Or Wall Installation - Aastra 51I Installation Manual

Desk or Wall Installation

Install on the Desk
The desk installation for the 51i IP phone consists of two legs that attach to
the back of the phone near the top corners. A total of four different
viewing angles allows users to personalize their phone viewing preference.
Attach each leg by inserting the tabs on the leg into the slots on the bottom
of the phone. There are three pair of leg slots on each corner of the phone;
each leg uses two pairs (1&2, or 2&3) giving two leg positions designating
different viewing angles. Furthermore, the legs can be reversed which
offer two additional viewing angles.
For a higher viewing angle, use the second and third slots from the top. For
a lower viewing angle, use the first and second slots from the top. Then
push the stand towards the phone until it snaps into place.
20.7 deg.
Incline Angle
12 Model 51i IP Phone Installation Guide
23.3 deg.
Incline Angle
Total 4 Viewing Angles
Three leg slot locations
for customizing the height
of the desk phone.
26.6 deg.
Incline Angle
30.9 deg.
Incline Angle