Lexmark MX6500e 6500e Quick Reference Manual page 33

3
Close the output expander rear door.
4
From the scanner control panel, touch Done to clear the message
and continue printing.
[x]‑page jam, open automatic feeder top
cover [28y.xx]
1
Remove all original documents from the ADF tray.
Note: The message is cleared when the pages are removed from
the ADF tray.
2
Open the ADF cover.
3
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
4 Close the ADF cover.
5 Straighten the edges of the original documents, then load the
documents into the ADF, and then adjust the paper guides.
6 From the scanner control panel, touch Done to clear the message
and continue printing.
33