Lexmark MX6500e 6500e Quick Reference Manual page 27

4
From the scanner control panel, touch Done to clear the message
and continue printing.
[x]‑page jam, open upper and lower rear
door. [231–234]
CAUTION—HOT SURFACE: The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
1
Pull down the rear door.
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
3
Close the rear door.
4
Open the rear door of the duplex area, and then push the back of
the standard tray.
5
Press down the rear duplex flap, then firmly grasp the jammed
paper, and then gently pull out the paper.
27
Note: Make sure all paper fragments are removed.
2
1
6
Insert the standard tray.
7
From the scanner control panel, touch Done to clear the message
and continue printing.
[x]‑page jam, remove standard bin
jam. [203]
1 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.