Lexmark MX6500e 6500e Quick Reference Manual page 31

3
Close the staple finisher rear door.
4
From the scanner control panel, touch Done to clear the message
and continue printing.
[x]‑page jam, remove paper, open stapler
door. Leave paper in bin. [455–457]
1
From the stapler bin, firmly grasp the jammed paper on each side,
and then gently pull it out.
Note: Make sure all paper fragments are removed.
2
Open the stapler door.
3
Pull down the latch of the staple cartridge holder, and then pull out
the holder from the printer.
31
4
Use the metal tab to lift the staple guard, and then remove any
loose staples.
5 Press down the staple guard until it clicks into place.