Mid-Mount
The RBT‐8110 ships with a mid‐mount accessory kit. Figure
rack, with the front mount attached, and a mid‐mount placement example.
To attach the chassis to the rack, perform the following steps:
1.
Use the two mounting holes closest to the center of the chassis for more balanced mounting
position.
2.
Use the M4 screws (2 screws for each side) to secure the center mounting bracket to the
chassis. Use the M5 screws to secure the chassis to the post of the rack.
Figure 2-2
Rack Mounting—Mid-Mount
2‐2 shows the RBT‐8110 installed in a
RBT-8110 Wireless Switch Installation Guide 2-5
Rack Mounting