Table of Contents
Advertisement
remote control
Remote Control Operation
The remote control is the secondary input device for navigating the system's
interface. In device operation, the OK key has the same function as "left click" of
the mouse.
Item
Function
STANDBY
1
LOGIN/LOCK
2
Number/Channel Buttons
3
Window
4
Display
MENU
5
PTZ
6
EXIT
7
Navigation/OK
(Select direction
arrow, then press
8
OK to start PTZ
motion)
+ / -
9
RECORD
10
STOP
11
EXTRA
12
Playback
13
Controls
Description
Press to turn standby mode ON/OFF
If "Security" has been enabled in the setup menu, press to
open the user password login screen or log off system.
Press buttons 1~9 to view the selected channel in full-
screen. To display 2-digit channels press both buttons
slowly. Pressing 0 returns screen to 16 camera display.
Toggle between split-screen displays: Channels 1-4, 5-8,
9-12, 13-16, 1-9, 8-16, 1-16
Opens the main menu
Press to open the PTZ control window
Close menu windows
In menus, press to confirm selections; in PTZ mode, press
to change the navigation buttons to control the connected
PTZ camera (not included)
Press to move cursor up; in PTZ mode, press to pan
camera up
Press to move cursor down; in PTZ mode, press to pan
camera down
Press to move cursor left; in PTZ mode, press to pan
camera left
Press to move cursor right; in PTZ mode, press to pan
camera right
In menus, press to adjust values
Press to start manual recording
Press to stop manual recording
For future use
Increase reverse playback speed 2X, 4X, 8X
Press to freeze playback to one frame, then press again to
advance frame-by-frame
Press to start playback
Press to slow playback speed by 1/2, 1/4, 1/8
Press to increase forward playback speed 2X, 4X, 8X
product overview
Page 5
DVR controls
1
3
4
6
8
9
10
11
Remote Control
TIP: When using the remote
control to enter password
and camera titles, select the
field using the navigation
buttons, press OK, and then press the num-
ber buttons.
Battery Replacement -
Instructions for Use
Always purchase the correct
size and grade of battery most
suitable for intended use. Re-
place all batteries of a set at
the same time. Clean the battery contacts
and also those of the device prior to battery
installation. Ensure the batteries are installed
correctly with regard to polarity (+ and -). Re-
move batteries from equipment that is not to
be used for an extended period of time. Re-
move used batteries promptly.
2
5
7
9
12
13
Advertisement
Table of Contents
