Service Safety - Craftsman 146.107190 Owner's Manual

TOOL USE AND CARE SAFETY
1. DO NOT force the tool. Use the correct tool for your application.
The correct tool will do the job better and safer at the rate for
which it is designed.
2. DO NOT use the tool if the switch does not turn it "On" or "Off". Any
tool that cannot be controlled with the switch is dangerous and must
be repaired.
3. ALWAYS disconnect the plug from the power source before making any
adjustments, changing accessories or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
4. ALWAYS store idle tools out of the reach of children and other
untrained persons. Tools are dangerous in the hands of untrained users.
5. ALWAYS check for misalignment or binding of moving parts, breakage
of parts, and any other condition that may affect the tool's operation.
If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
I WARNING:
USE OF ACCESSORIES THAT ARE NOT RECOMMENDED FOR USE
WITH THIS TOOL MAY CREATE A HAZARDOUS CONDITION.
6. ALWAYS use only the Craftsman accessories that are recommended
for this tool. Accessories that may be suitable for one tool can become
hazardous when used on another tool.
SERVICE SAFETY
1. Tool service must be performed only by Sears or other qualified repair
personnel. Service or maintenance performed by unqualified personnel
could result in a risk of injury.
2. When servicing a tool, ALWAYS use only identical replacement parts.
Follow instructions in the maintenance section of this manual. Use of
unauthorized parts may create a risk of electric shock or injury.
SYMBOLS The following symbols appear on the label of your tool
V ........................................................................... volts
A ........................................................................... amps
Hz ......................................................................... hertz
........................................................................ alternating current
no ........................................................................ no-load speed
[] ........................................................................ double insulated
IMPORTANT! READ ALL INSTRUCTIONS!
5