Service Safety - Craftsman 172.10721 Owner's Manual

TOOL USE AND CARE SAFETY
1. DO NOT force the toot. Use the correct tool for your application.
The correct tool will do the job better and safer at the rate for which it is
designed.
2. DO NOT use the tool if the switch does not turn it "On" or "Off".
Any tool that cannot be controlled with the switch is dangerous and
must be repaired.
3. ALWAYS disconnect the plug from the power source before making
any adjustments, changing accessories or storing the tool. Such
preventive safety measures reduce the risk of starting the tool accidentally.
4. ALWAYS store idle tools out of the reach of children and other
untrained persons. Tools are dangerous in the hands of untrained users.
5. ALWAYS check for misalignment or binding of moving parts, breakage
of parts, and any other condition that may affect the tool's operation.
If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
I Z_WARNING:
USE OF ACCESSORIESTHATARE NOT RECOMMENDED I
FOR USE WITH THIS TOOL MAY CREATE A HAZARDOUS CONDITION.
6, ALWAYS use only the Craftsman accessories that are recommended for
this tool, Accessories that may be suitable for one tool can become
hazardous when used on another tool.
SERVICE SAFETY
1. Tool service MUST BE performed only by a Sears Parts and Repair Center.
Service or maintenance performed by unqualified personnel could result in a
risk of injury.
2. When servicing a tool, ALWAYS use only identical replacement parts.
Follow instructions in the maintenance section of this manual. Use of
unauthorized parts may create a risk of electric shock or injury.
IMPORTANT! READ ALL INSTRUCTIONS
5