Table of Contents
Advertisement
INSERT CABLE CLIP
• Insert plastic cable clip into hole on the
back of handle column. Push cables
into clip,
Handle Column
Clip
CONNECT SHIFT ROD
1. Insert end of shift rod into hole of shift
lever indicator.
2. Insert hairpin clip through hole of shift
rod to secure.
Shift Lever
HairpinC_lip
Indicator
Sh_ Rod
REMOVETILLER
FROM
CRATE
1. Make sure shift lever indicator is in "N"
(neutral) position.
2. Tilt tiller forward by lifting handle.
Separate cardboard cover from
leveling shield.
3. Rotate tiller handle to the right and
pull tiller out of carton.
CHECKTIRE
PRESSURE
The tires on your unit were overinflatad at
the factory for shipping purposes. Correct
and equal tire pressure is important for
best tilling performance.
• Reduce tire pressure to 20 PSI.
HANDLE
HEIGHT
• Handle height may be adjusted to
better suit operator. (See _O ADJUST
HANDLE HEIGHT"
in the Service and
Adjustments section of this manual).
7
Hide quick links:
Advertisement
Table of Contents
