Craftsman 315.220380 Owner's Manual page 11

Resin
A sticky, sap-based substance.
Rip Cut "
In a radial saw, a cut made with the blade parallel to
the fence and perpendicularto the arm. Can be
across or with the grain. The teeth point up at the
point of contact with the wood,
Sawblade Path
The area directly in line with the blade -- over, under,
behind, or in frontof it. Also, the workpiece area which
will be or has been cut by the blade.
Set
The distance that the tip of the saw blade tooth is off
sat from the face of the blade.
Throw-Back
Saw throwing back a workpiece similar to kickback.
Through Sawing
AnyCutting operation where the blade extends
completely through the workpieca.
Trailing End
The workpiece end last cut by the blade in a ripcut.
Workplace
The item on which the cuttingoperation is being done.
The surfaces of a workpiece are commonly referred to
as faces, ends, and edges.
Worktable
The surface on which the workpieca restswhile
performinga cutting operation.
,&
WARNING: To prevent accidental startingthat
could cause possibleserious personalinjury,
assemble all parts to your saw before connecting
it to power supply.The saw shouldnever be
connected to the power supplywhen you are
assembling parts, making adjustments,installing
or removingblades, or when not in use.
_, WARNING: If any parts are missing,do not
operate this tool untilthe missing parts are
replaced. Failure to do so could resultin possible
serious personal injury.
• Carefully remove all parts from the carton and
place the saw on a level work surface. Separate
and check againstthe list of loose parts.
• Do not discard the packing materials until you have
carefully inspectedthe saw, identifiedall parts,and
satisfactorilyoperated your new saw.
Note: If any parts are damaged or missing,do not
attempt to plug in the power cord and turn the
switchon untilthe damaged or missing parts
are obtained and are installedcorrectly.
The followingrecommendedaccessoriesare currentlyavailable at Sears Retail Stores.
• Steel and carbide tipped circularsaw blades • Adjustable taper jig
• Hold down clamps • Sawdust collectorshroud
• Saw baskets
WARNING: The use of attachments or accessories not listed mightbe hazardous.
11 CRIIFTSNRN" RADIAL S AW 315.220380