Timing Parameters - FieldServer FS-8700-31 Siemens TIWAY I Driver Manual

FS-8700-31 Siemens TIWAY I
TIWAY_Host_Adapter_Cmd
TIWAY_Address_List
Preset_Step_List
Secondaries_List
Address
Length
4.4.3.

Timing Parameters

Section Title
Map Descriptors
Column Title
Scan_Interval
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Specifies a host adapter
command to execute
A list of PLC memory
addresses that may be
used for random read
and writes
A list of preset step
values to be used with
the Drum_Count_Preset
datatype. Each value is
tied to an address.
A list of secondary PLC
addresses to be used
with the Connect_ and
Disconnect_Secondaries
host adapter commands.
Starting address of read
or write block
Length of Map Descriptor 1-65535
Function
Rate at which data is polled
Page 7 of 23
Loop_Output
24-bit datatypes
Word_Force
Packed-bit datatypes
Discrete_Input_Packed
Discrete_Output_Packed
Control_Register_Packed
Read_Secondary_Log
Report_HIU_Config
Report_Adapter_Config
Report_NM_Config
Soft_Reset
Reset_Adapter
Disconnect_Secondaries
Connect_Secondaries
0-65535
0-255 for loop datatypes and
Drum_Count_Preset
Maximum of 80 space
seperated values allowed.
0-255
Maximum of 80 space
seperated values allowed.
1-255
255 indicates all secondaries
from 1 to 254
0-65535
0-255 for loop datatypes and
Drum_Count_Preset
Legal Values
≥0.001s