CONCEPTS
1
TECHNICAL SPECIFICATIONS
TYPE OF MACHINE
• 3-axis machining center.
MACHINING CONDITIONS
• The machining technical data are based on using construction steel of up to 700 N/mm2.
• The feedrate and rpm values obtained will depend on the type of tool used in each example.
2
BASIC CNC OPERATING CONCEPTS
USEFUL KEYS
(a)
Key for editing and simulation
(b)
Cycle-start button.
(c)
Reset button.
(d)
Execution button.
(e)
Cycle stop.
OPEN A PROGRAM.
1. Press the panel key (a).
2. Press the OPEN PROGRAM softkey (F1).
3. Use the file managing window to enter the name, number or letters of the exercise and press
ENTER to confirm it.
4. Once inside the program, start entering the data.
1
CNC 8070
E
XAMPLES MANUAL
Concepts
Chapter 1
Page 1 of 96